氮氧化物轉換器產品樣冊-機箱式-英文版

更新時間：2022-04-15 點擊次數：3344次

　　NOx converter

　　In order to protect human health and the environment, the emission of nitrogen oxides must be reduced as much as possible. In order to use economical gas analysis methods in CEMS monitoring technology, such as NDIR non dispersive infrared technology and nduv UV technology, NO2 gas in the exhaust gas needs to be converted into NO. The conversion takes place in an electrically heated reactor filled with catalyst materials specially developed for this purpose. The NOx converter has the characteristics of high conversion rate and long service life, low power, low heating capacity and convenient maintenance.

　　NOx converter has obvious advantages in similar products, high conversion efficiency, long service life and independent intellectual property rights.

　　Product features

　　Customized catalytic materials with low gas resistance and high efficiency Special preheating chamber design

　　High density catalyst filling structure

　　No organic matter volatilization and interference Professional hot runner design, simple and generous

　　Application occasion

　　Occasions of NO measurement in CEMS for continuous flue gas monitoring Analysis of nitrogen oxides in the atmosphere

　　Technical Data

Product model	NOX-10
Product code	JY010B
Housing	19" rack mounting 3U
Temperature of sample gas	max.180℃，no condensate
Temperature range, adjustable	450℃
Gas flow rate	max.3LPM
Operating pressure	max.2bar abs.
Warm-up time	approx.30min
Operating temperature	350℃-420℃
Conversion N02/N0	＞95%
Live of catalyst N02/N0	to renew approx. every 6 months as preventive measure
Differential pressure	<20 mbar
Ambient temperature	+10℃-50℃
Storage temperature	-25℃-65℃
Relative humidity	<80%
Sample gas connections	PVDF OD6mm or OD8mm or SS316 OD8mm
Dimension	483W133H276D
Power supply	230V 50HZ
Power consumption	400W
Electrical connection	Main power plug connector incl. two fine fuse 5 x 20 mm, 230V: 6,3A, 115V: 10A, 2 m cable and shock-proof plug. Alarm-/control signals 9-pin sub D connector
Status signals for temperature	NO contact-potential free, contact rating max. 24V, 1A
Materials of sample contacting parts	316SS，PVDF
Degree of protection	IP 20 EN60529
Weight	6.2kg
Electrical equipment standard	EN 61010

　　Appearance dimension

　　19 inch chassis type：

　　Unit mm

上一篇：沒有了

下一篇：氮氧化物轉換器的正確使用方法

返回列表>>